Allen Bradley Ethernet-Based Device Integration and Communication Training Course

This live, instructor-led program, offered in Denmark (either online or on-site), targets beginner to intermediate-level engineers and technicians looking to master the core concepts of AB PLCs and apply them to real-world manufacturing challenges.

Upon completion of this training, participants will be equipped to:

• Appreciate the significance and diverse applications of AB PLCs within the manufacturing sector.
• Develop AB PLC programs using RSLogix 5000/Studio 5000 software.
• Identify and resolve common system issues while executing routine maintenance on PLC systems.
• Conceive and deploy PLC-based control systems tailored to specific manufacturing processes.
• Demonstrate advanced proficiency in PLC programming through the execution of a hands-on project.

Smart Factory AI involves deploying artificial intelligence to automate, monitor, and optimize industrial operations in real time.

Designed for beginner-level decision-makers and technical leads, this instructor-led live training (available online or onsite) offers a strategic and practical overview of leveraging AI within smart factory environments.

Upon completion, participants will be equipped to:

• Grasp the fundamental principles of AI and machine learning.
• Recognize primary AI applications in manufacturing and automation contexts.
• Examine how AI facilitates predictive maintenance, quality control, and process optimization.
• Assess the procedures required to initiate AI-driven projects.

Course Structure

• Engaging lectures and interactive discussions.
• Practical case studies and collaborative group exercises.
• Strategic frameworks and implementation advice.

Customization Opportunities

• To arrange a tailored training experience for this course, please get in touch with us.

CANoe is a robust software platform engineered by Vector to support the development, verification, and analysis of vehicle network architectures and Electronic Control Units (ECUs), with a particular focus on systems utilizing the Controller Area Network (CAN) protocol.

This instructor-led, live training session (available online or on-site) is tailored for automotive engineers and testers ranging from beginner to intermediate levels who aim to leverage CANoe for the simulation, testing, and analysis of CAN-based communication environments..

Upon completion of this course, participants will possess the ability to:

• Successfully install and configure CANoe along with its various components
• Grasp the fundamentals of the CAN protocol and understand message framing structures
• Develop simulations for ECUs and CAN networks by utilizing CAPL scripting
• Effectively monitor, analyse, and troubleshoot CAN traffic

This live, instructor-led training in Denmark (delivered online or on-site) is tailored for intermediate to advanced engineers and technicians who aim to proficiently program, operate, and optimize Fanuc and Epson robotic systems for industrial use cases.

By the conclusion of this course, participants will be capable of:

• Gaining a deep understanding of the architecture and capabilities of Fanuc and Epson robots.
• Writing code for robot movements, logic flows, and sensor integrations.
• Enforcing safety standards and executing effective troubleshooting procedures.
• Streamlining robotic workflows to boost overall efficiency.

This practical course, Industrial Robotics Automation: Integrating ROS with PLCs & Digital Twins, focuses on connecting traditional industrial automation with contemporary robotics frameworks. Learners will master the integration of ROS-based robotic systems with PLCs to achieve synchronized operations and leverage digital twin environments for simulating, monitoring, and optimizing production workflows. The curriculum places a strong emphasis on interoperability, real-time control, and predictive analysis through the use of digital replicas of physical assets.

Delivered as live, instructor-led training—either online or onsite—this program is designed for intermediate-level professionals seeking to develop practical competencies in linking ROS-controlled robots with PLC environments and implementing digital twins to enhance automation and manufacturing efficiency.

Upon completion, participants will be equipped to:

• Grasp the communication protocols facilitating interaction between ROS and PLC systems.
• Establish real-time data exchange between robotic units and industrial controllers.
• Create digital twins for effective monitoring, testing, and process simulation.
• Seamlessly integrate sensors, actuators, and robotic manipulators into industrial workflows.
• Design and validate industrial automation systems using hybrid simulation setups.

Course Format

• Engaging lectures accompanied by architecture walkthroughs.
• Practical exercises focused on integrating ROS and PLC systems.
• Implementation of simulation and digital twin projects.

Customization Options

• For a tailored training experience, please reach out to us to discuss your specific requirements.

This live, instructor-led training in Denmark—available online or onsite—is designed for junior to senior engineers and technicians looking to utilize XGT Series PLCs for hardware setup, module administration, and the maintenance of stable PLC systems.

Upon finishing this session, attendees will be equipped to: identify XGT hardware parts, configure PLC system modules, execute backup and diagnostic procedures, and resolve common hardware anomalies.

This live, instructor-led training in Denmark (conducted online or on-site) is tailored for PLC users aiming to utilize XG5000 for the creation, testing, downloading, monitoring, and troubleshooting of PLC programs.

By the end of this session, participants will have the capability to create and manage projects, configure hardware and communications, develop ladder logic, and diagnose PLC faults.

Designed for intermediate automation engineers and control system designers, this live, instructor-led course (delivered online or onsite) guides the implementation of motion control solutions using Omron PLCs.

By the end of the session, participants will be equipped to:

• Comprehend essential motion control concepts and their industrial applications.
• Configure motion hardware and software components in Sysmac Studio.
• Program and fine-tune single-axis and multi-axis motion control systems.
• Execute coordinated motion strategies, encompassing interpolation and synchronization.

This live, instructor-led training session in Denmark (delivered online or on-site) is tailored for automation engineers and control system designers seeking to configure, programme, and commission Omron Sysmac systems, including NJ/NX controllers, EtherCAT networking, G5/1S/1SA servo drives, NA Series HMI, and NX safety hardware.

This module provides a comprehensive overview of Programmable Logic Controller (PLC) fundamentals. Following an exploration of core PLC concepts, you will develop practical skills in creating and executing Ladder Diagram instructions within Industrial Automation contexts. This course is tailored for Electrical Specialists, Mechanical Engineers, and Programmers seeking to expand their expertise in Industrial Automation.

This instructor-led, live training held in Luxembourg is designed for beginner to intermediate-level engineers, technicians, and automation professionals who want to utilize Python to solve technical issues, automate routine tasks, and handle industrial data.

By the conclusion of this training, participants will be able to:

• Write clear and structured Python scripts for technical scenarios
• Apply programming logic to engineering-related problems
• Use Python to process data from CSV, logs, and text files
• Automate repetitive engineering and automation workflows

A Remote Terminal Unit (RTU) serves as an essential field device responsible for data acquisition, signal transmission, and command execution within automated and power system networks.

This live, instructor-led training session, available either online or onsite, is designed for intermediate-level professionals seeking to master RTU configuration for automation and control operations in power cell environments.

Upon completion, participants will be able to:

• Install RTU hardware and accurately map input/output channels.
• Define communication parameters for seamless integration with SCADA and control systems.
• Develop logic, alarm systems, and control strategies on RTU platforms.
• Effectively diagnose and resolve RTU performance and connectivity issues.

Course Structure

• Instructor-led presentations featuring real-world case studies.
• Practical configuration tasks and hands-on exercises.
• Live demonstrations of RTU communication and control workflows.

Customization Availability

• Tailored course versions can be provided to suit specific RTU hardware models or control environments.